LED DSP5 EFI Selector Switch, Chevy/GMC (2001-04) 6.6L Duramax LB7 (Blue Wire)
DSPBBG
Multi-position LED switch for EFI Live. Change your EFI Live tunes while driving and have LED light indicating the current position you have selected. The LEDs light up progressively clockwise around the gauge face with the number of lite LEDs matching the position selected. It is easily mounted in any standard 2-1/16" gauge pod. The notches reduce the need extra hardware and make installation easy.
You will simply need to connect the switch to the communication harness pins like the normal DSP5 switch. Then you will need to locate a ground and keyed power source in the fuse panel. The electrical connectors for the ground and power are provided. The communication and power wiring harnesses are 80" long (120" available) to allow you to mount the selector switch just about anywhere you want (ie: overhead or pillar gauge pod). Installation could not get much easier than this.
Housing is an Isspro EV2 housing and EV2 bezel.
You will simply need to connect the switch to the communication harness pins like the normal DSP5 switch. Then you will need to locate a ground and keyed power source in the fuse panel. The electrical connectors for the ground and power are provided. The communication and power wiring harnesses are 80" long (120" available) to allow you to mount the selector switch just about anywhere you want (ie: overhead or pillar gauge pod). Installation could not get much easier than this.
Housing is an Isspro EV2 housing and EV2 bezel.
Please Call for Availability
Description
DSP5 Installation Help
Pin numbers for your DSP5 Switch
LB7
Blue Wire = Blue connector, pin 69
Black Wire = Blue connector, pin 49
LLY
Purple Wire = Grey connector, pin 32
Black Wire = Grey connector, pin 50
LBZ & LMM
Grey Wire = Connector 1 (the larger plug), pin 46
Black Wire - Connector 1 (the larger plug), pin 54
Your DSP5 switch has a nut and two washers. The bottom smooth washer must remain on the bottom with the tab located in hole number five. If it falls out, turn the switch fully counter clockwise and place the washer back with the pin in hole five and make sure the switch moves exactly four clicks clockwise. If not, turn the switch back fully counterclockwise, move the pin and try again.
Pin numbers for your DSP5 Switch
LB7
Blue Wire = Blue connector, pin 69
Black Wire = Blue connector, pin 49
LLY
Purple Wire = Grey connector, pin 32
Black Wire = Grey connector, pin 50
LBZ & LMM
Grey Wire = Connector 1 (the larger plug), pin 46
Black Wire - Connector 1 (the larger plug), pin 54
Your DSP5 switch has a nut and two washers. The bottom smooth washer must remain on the bottom with the tab located in hole number five. If it falls out, turn the switch fully counter clockwise and place the washer back with the pin in hole five and make sure the switch moves exactly four clicks clockwise. If not, turn the switch back fully counterclockwise, move the pin and try again.
Details
- DSPBBG
- DSPBBG
- 708744248381
- Diamond T Enterprises
- New
Categories
Shipping Information
- Item Requires Shipping
- 1.0 lbs.
- W6.0000” x H6.0000” x L6.0000”
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!